Makita 9237C-X3 Rotary Buffer

If you are tired of looking at swirls even after polishing it's time to step up and grab the premium rotary buffer on the market. The Makita 9237C-X3 is an outstanding buffer that has the power to remove very deep imperfections in your paint or jewel your paint to a new level of gloss and depth. Orbital and dual action buffers don't have nearly the power this buffer has to really work in a polish and get the absolute maximum cutting power and best possible finish. With the Makita 9237C-X3 you can work in a polish significantly faster while achieving better results than an orbital or DA buffer. This is possible because it's a rotary buffer that spins continuously in one direction instead of just oscillating.

With any rotary buffer you should do some research on how to properly operate a rotary and put in some time practicing at low speeds before performing your first detail. With a skilled operator, you can completely restore the oldest and most faded clear coats to look like new!

 large part of the reason this buffer is so highly regarded is because each part of it was built to achieve the best results possible and last for years and years! This buffer has a 10 amp motor that will not bog down, so it delivers smooth and reliable power no matter the task. It's even powerful enough to use for really tough grinding tasks if desired. It weighs 6.6lbs so it's pretty light and easy to maneuver for just about anyone. It comes with a side handle and a hoop handle that makes it very easy to control and operate for you at virtually every panel during the process. To adjust the speed we recommend you set the speed dial (1 - 6) to the desired speed (see chart below). If you set the speed to 2 then the buffer will not go above 900 RPMs. However there is a variable speed trigger, which you squeeze to turn the buffer on and start spinning. If you squeeze this trigger lightly it will start off at a lower speed and if you squeeze it all the way it will reach 900 RPMs. It also has switch that allows you to lock in the trigger so you don't have to worry about holding the it at one constant speed. This feature allows you to keep your hand off the trigger and remain focused on working in the product.

Dial settings to RPM output
1 = 600 RPMs
2 = 900 RPMs
3 = 1500 RPMs
4 = 2100 RPMs
5 = 2700 RPMs
6 = 3000 RPMs

The Makita 9237C-X3 is a very powerful rotary buffer that can go from 600 - 3000 RPMs. Many other buffers start off between 900 - 1200 RPMs which can be difficult to use for new rotary users. However, this unit can start at 600 RPMs which makes learning how to use it much easier and safer. At the top speed (3000 RPMs) it has far more power than you will ever need while detailing. With this perfect range, detailers can operate this unit safely and it has all the power you will ever need when you master the unit. Use this buffer in combination with a quality buffing pad and polish and you will be amazed at how easy it is to restore your paint like new.