Nasiol Glass Shield Wipe-On

The easy to apply formula will protect for up to 1 year (40,000 wiper blade strokes) and one package will provide you with application coverage for one windshield. To apply, simply follow the numbers on the wipes. Number 1 is to clean the surface, prepping the glass for the second step. Number 2 is for protecting the glass and applies in an easy wipe on process. After application, your windshield will provide you with improved visibility and a surface that stays cleaner much longer. For best results, thoroughly clean and polish your glass surfaces if imperfections are present. Protect your glass surfaces easier with the Nasiol Glass Shield Wipe On!

Specifications

• Up to 1 years, 40,000 wiper blade wipes
• 13>pH>1
• 75-100nm
• Curing period - 3 hours to touch, 24 hours for water contact
• Application Temperature - 41 degrees to 86
• Shelf life - 1 year without opening, 1 week after opening

Application:
Package 1

• Avoid direct sunlight during the application and only work on cool surfaces.
• Clean the outer surface of the windshield with a suitable glass cleaner to remove lime, resin, oil, and dust.
• By looking at the surface from different angles, identify the residues and clean again if necessary. After rinsing with water, dry the windshield with a clean microfiber cloth.
• Open the package and start to wipe beginning from the top corner of the glass panel, wipe the entire surface with lateral and vertical movements.
• Allow the surface to dry in ambient conditions. Continue application with Nasiol Glass Shield Wipe-On.

Package 2

• The application and curing process should be done at room temperature, away from direct sunlight, in a dust free, moisture free environment.
• If it is accidentally used on surfaces other than the specified areas, immediately wipe it with microfiber cloth without letting it cure on the surface. Wear gloves before application.
• First, the surface should be cleaned with Nasiol Clean wipe in package 1. It must be free from any contamination. The surface should also be dry. Coatings made on poorly cleaned surfaces may not be effective. Use one piece of Nasiol Glass Shield Wipe-On for half of the windshield.
• As soon as the wipes are removed from the package, immediately apply on the surface by lateral motion, without over pressing to cover all sides of the half glass panel equally. Try to spread the chemical evenly all over the half glass panel.
• The tissue will get dry as the product is transferred to the surface. Buff the surface until traces of the wiping totally disappear. To get the best result, leave it to cure for 24 hours in a dust free and dry place away from direct sunlight.